Table of Contents
Advertisement
18.7.99
Changing the system code, changing the PIN
Changing the system code
B
Changing the handset PIN
kap04.fm5
To protect your personal settings, Gigaset 2010 Tango has
two code numbers, a four-digit system code and a four-
digit handset PIN (personal identification number). The
factory defaults are as follows:
System code : "0000"
Handset PIN : "0000"
You need to know the system code in order to create ba-
sic settings or to lock the telephone for outgoing calls.
The system code can thus be described as the main code
for your Gigaset 2010 Tango telephone.
The PIN primarily protects settings on your handset(s),
but it has no effect on the basic functions of the base sta-
tion. For security reasons, a new system code and a new
PIN should be entered.
If several handsets are operated (
system code is valid for each one.
# 8 *
Start setting procedure.
Enter the current system code (factory default "0000").
o
Enter the new four-digit system code. Note carefully the
o
number entered.
o
Enter the new system code again to confirm.
B
Store the setting.
8 9
B
Start setting procedure.
Enter the current PIN (factory default "0000").
o
Enter the new four-digit PIN. Note carefully the number
o
entered.
o
Enter the new PIN again to confirm.
B
Store the setting.
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Operating modes
When entering a new system code or PIN you
must not forget the number entered. Other-
wise intervention in the device is necessary. If
this happens, please contact your specialist
dealer.
page 48), the same
19
Advertisement
Table of Contents
