Activating/Deactivating Base Station Number Display On Handset; Selecting The Best Station - Siemens Gigaset 2010 Tango Operating Instructions Manual

18.7.99
Operation at more than one base station

Activating/deactivating base station number display on handset

Selecting the best station

52
kap17.fm5
You can program your handset to display the base
station with which the unit has radio contact.
3 6
B
Start the setting procedure. The current setting is
displayed:
36 1 = activated, 36 0 = deactivated.
1
B
Activate the base station number display.
or
0
B
Deactivate the base station number display (factory
setting).
When the display is activated, the number of the base
station is displayed continuously:
:
-1-
f
Normally, radio contact is automatically re-established if
you move your handset from one base station radio area
to another. If problems occur, you can select the best sta-
tion. This is the station to which your handset can set up
the best radio connection.
0
B ü
station
Start the setting procedure. The numbers of the base sta-
tions at which the handset is registered are displayed.
0 1 2
P
f
B Select best base station.
The best base station is displayed.
- 2 -
P
f
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
(Example: handset is linked
N
to base station number 1)
(Example: base stations
N
1 and2 are displayed)
(Example: base stations
N
with no. 2 are selected)