Siemens Gigaset 2010 Tango Operating Instructions Manual page 24

18.7.99
Operating modes
Switching on the handset
Switching off the handset
14
kap04.fm5 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
When the handset is in protected mode:
h
Press the handset key briefly. You will hear the positive
confirmation beep. The following message appears on
the display when the handset is switched on:
:
N
f
When the handset is switched off:
h Press the handset key briefly. You will hear the positive
confirmation beep. The display flashes. Wait until it stops
flashing. The handset is switched on.
or
Place the handset back into the base station. The mes-
sage appears on the display. The handset is switched on.
h Press the handset key until the display message is
cleared. You will hear the positive confirmation beep.