Allowing Internal Parties To Listen In On A Call; Ending An Internal Call - Siemens Gigaset 2010 Tango Operating Instructions Manual

18.7.99
Checking your own internal number

Allowing internal parties to listen in on a call

Ending an internal call

kap07.fm5 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Collective ringing and internal calls
I
Press the internal key.
The internal call number
of the handset from
which you are calling is
shown on the display.
It is possible to enable an internal party to listen in on a
call with an external party from his/her handset.
Precondition: An external connection must be already
set up.
c
An external connection is already set up.
I
Press the internal key. Dial the internal party (1... 6). An ex-
o
ternal call is under way. The internal party answers. Hold
your conversation.
BR
The external call is resumed and the internal party can
listen in.
Disconnect internal party again
BR
The internal party is disconnected and hears the busy
tone.
or
a
The internal party hangs up by pressing the on-hook key.
Replace the handset in the base station or charging unit.
The line is disconnected.
or
a
Disconnect line ("on-hook").
1
N
G
f
b
29