Incoming Calls; Accepting Calls - Siemens Gigaset 2010 Tango Operating Instructions Manual

Siemens the cordless digital dect telephone system expandable to 6 handsets operating instructions

Table of Contents

18.7.99

Incoming calls

kap05.fm5

Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619

An incoming call is indicated by the ringer.

You will know that it is an external call when you the

following message appears on your handset display:

You will know that you are receiving an internal call if you

see the following message on your handset display (the

example shows an incoming call from a second handset):

If the handset is in the charging unit:

Remove the handset from the charging unit. You are con-

nected.

The automatic acceptance of calls by removing

the handset from the charging unit is an adjust-

able setting (

this function off, you must press the

when you have removed the handset from the

charging unit.

If the handset is not in the charging unit:

Press the off-hook key on the handset.

You are connected.

- - -

page 35). If you have switched

button

Table of Contents