Exchange Codes - Siemens Gigaset 2010 Tango Operating Instructions Manual

18.7.99
Setting the flash time in dual-tone multifrequency signalling (DTMF)
930
O
936
O
933
O
934
O

Exchange codes

kap04.fm5
# 1
B
Start the setting procedure.
Enter the four-digit base code (factory default: "0000")
o
( page 19).
B
Set a flash time of 80 ms.
or
B
Set a flash time of 100 ms (factory default).
or
B
Set a flash time of 300 ms.
or
B
Set a flash time of 600 ms.
For through connection to the public telephone network
you must set:
the exchange code
the pause length after the exchange code (if a pause
is necessary after entry of the exchange code)
If the telephone system is connected as a subsystem to
a main system, you must set the:
the exchange code
the main system exchange code
the pause length after the exchange code
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Operating modes
For the pause length to be entered after the ex-
change code, please consult the documentation
about your telephone system.
17