Table of Contents
Advertisement
18.7.99
Base station settings
Base station settings
Switching the base station ringer off and setting the ringer volume
B
32
kap09.fm5
You can program your Gigaset 2010 Tango to suit your
own individual requirements. The settings are made from
a registered handset.
It is possible to define whether the ringers should be sig-
nalled on the base station or only on the handset. You can
set the ringer volume for the ringer on the base station.
There are seven volume levels available:
Level 0
Level 1 ... Level 6 =
The factory default is level 6 (loud).
# * 5
Start setting procedure. The ringer setting is sounded.
The set volume is indicated on the display:
n 5 6
:
P f
B
o
Press the digit for the desired volume (1 to 6) or 0 to
switch the ringer off and store setting.
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
=
Switch off base station ringer.
Calls will only be signalled on the
handset.
Ringer volume low ... loud
It is also possible to set the ringer volume on the
handset (
page 34).
(Example: ringer volume 6
N
is set)
b
Advertisement
Table of Contents
