Table of Contents
Advertisement
18.7.99
Code numbers and factory defaults
Code numbers and factory defaults
Changing the system code, changing the PIN
Changing the system code
. t Service
58
KAP17A.FM5
To protect your personal settings, Gigaset 2011 Tango has
a four-digit system code and an eight-digit handset PIN
(personal identification number). The factory defaults are:
System code: "0000"
Handset PIN: "0000"
You need to know the system code in order to create ba-
sic settings or to lock the telephone for outgoing calls.
The PIN primarily protects settings on your handset(s);
it has no effect on the basic functions of the base station.
For security reasons, a new system code and a new PIN
should be entered.
If several handsets are operated (
system code is valid for each one.
Incorrect entries can be modified. Do do this,
follow the input function rules described from
When entering a new system code or PIN you
must not forget the number entered. Other-
wise intervention in the device is necessary. If
this happens, please contact Siemens.
t means: browse using x
(
Call up menu item.
#8:
Start setting procedure.
Enter the current system code (factory default "0000").
o
Enter the new four-digit system code. Note carefully the
o
number entered.
Enter the new system code again to confirm.
o
x
Store the setting.
SET
Gigaset 2011 Tango: A30852-X1106-B307-2-7619
page 52), the same
page 22 onwards.
confirm using u
Z
,
)
OK
Advertisement
Table of Contents
