Resetting System Pin; Resetting The Base To The Default Settings - Siemens Gigaset C300 User Manual

Base station settings
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to 0000.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the default settings.
Resetting the base to the
default settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode is activated and Eco Mode+ is
deactivated
u The system PIN is not reset
¤ Settings ¤ System ¤ Base Reset
§Menu§
§Yes§
Press the display key.
46