Restoring The Handset Factory Settings; Base Station Settings; Changing The System Pin; Restoring Base Station To Factory (Default) Settings - Siemens Gigaset CL100 Operating Manual

Restoring the handset factory settings

You can restore individual settings and changes to the original factory (default) settings
(for an overview of the handset default settings see page 24). Entries in the directory,
the caller list, the last number redial list, and the speed dial list as well as registration of
the handset with the base are retained.
¢ ¢
O I
MENU
a
Press and hold (return to idle status).

Base station settings

All base station settings are made via a registered Gigaset CL 1 handset.

Changing the system PIN

To protect the system settings from unauthorised access you should change the system
PIN (factory setting: 0000) to a PIN that only you know.
¢
MENU BASE SET
¢
Enter the currently valid 4-digit system PIN and press
¢
Enter the new 4-digit system PIN and press
¢
Enter the new 4-digit system PIN again
a
Press and hold (return to idle status).

Restoring base station to factory (default) settings

A reset does not alter the system PIN; handsets remain registered (for an overview of
base station default settings see page 24).
¢
MENU BASE SET
¢ ¢
RESET ? OK
¢
RESET ? OK
¢
SYSTEM PIN
¢ ¢
BASE RESET
¢
OK.
¢
OK.
¢
OK.
¢
Enter system PIN
Base station settings
OK
21