Switchover Between Celsius And Fahrenheit; Error Display - Sinclair SCC-16 User's Installation And Operation Manual

5.3.9 Switchover between Celsius and Fahrenheit

Under the off status of the current indoor unit, symbols of Celsius and Fahrenheit can be switched over by
pressing "Mode" and "▼" simultaneously for five seconds.
See Fig.5.22 for the switchover between Celsius and Fahrenheit:

6. Error Display

When some error arises during the operation of the system, error codes will be displayed where the
ambient temperature once is displayed on the LCD.
See Fig.6.1 for the error display:
See Table 6.1 for errors of the New UNI DC Inverter indoor units.
Fig.5.22 the Switchover between Celsius and Fahrenheit
AUTO
ROOM
CH LD LOCK I COM
ERROR ERROR
1 2 34 1 2 56 78
9 10 11 12 13 14 15 16
Mod e Mod e
Confirm/Cance l Confirm/Cance l
Fa n Fa n
On/Of f On/Of f
Fig. 6.1 Error Display
Al l on /Al l off Al l on /Al l off
SUN
MON
TUE WED THU FRIS AT THU
SET INNER UNIT
ALL TEMP
SHIELD
MODE
ON/OFF
SUNM ON TUEW ED THU FRIS AT
CENTER
24 68 10 12 14 16 18 20 22 24
0
Mo n Mo n Wed Wed Thu Thu
Tue Tue
Fri Fri Sat Sat Su n Su n
Shield Shield
Timer/ Time Timer/ Time Centra l Centra l
26