Table of Contents
Advertisement
The press on "Confirm/Cancel" can confirm this debugging setting and go to the viewing state of the
current indoor unit; otherwise this setting will not be saved.
See Fig.7.7 for the debugging operation. Fig.7 shows the indoor unit 1 and indoor unit 2, both of which
are connected with the port COM2. The address of one is 01 and the other is 04.
7.4 Labeling
A label is provided to identify the relationship of the indoor unit No. and the corresponding room name.
The user can write down the indoor unit No. and its corresponding room name on the label which then will
be stuck to the inside of the cover of the smart centralized controller so that the user can be clear about
the control object.
For instance, when the user has installed the air conditioners in the child room, bedroom and living
room, after the debugging it is available to view the indoor unit No. of each room and get clear about their
corresponding relationship.
Fig.7.7 Debugging
33
Advertisement
Table of Contents
