Table of Contents
Advertisement
See Fig. 5.4 for the centralized control to the temperature:
For other settings, please refer to the following sections.
5.2.3 All on/All off
In any case, the current indoor unit which is on/off will be turned off/on by pressing "All on/All off"
with "CENTER" displayed in the LCD and 2.5 seconds later the control command based on the settings of
the current indoor unit will be sent out to all online indoor units (Including: On/Off, Mode, Fan, ▲ / ▼, and
Shield).
5.3 Control Setting
5.3.1 On/Off
The unit will be turned on/off by pressing "On/Off" whenever it is under the single or centralized control.
And the control command will be sent out if the setting does not change in 2.5 seconds.
Note: As for the New UNI DC Inverter series, on condition that an error occurs to the indoor unit or
modes conflicts, whatever the control command is on or off, the indoor unit of the New UNI DC Inverter
will back to the off state.
Fig.5.4 Centralized Temperature Control
8
Advertisement
Table of Contents
