General Introduction; Function Introduction; Communication Network; Units Connection - Sinclair SCC-16 User's Installation And Operation Manual

Smart centralized controller

Hide thumbs Also See for SCC-16:

Table of Contents

1.General Introduction

This smart centralized controller is intended for New UNI DC Inverter Series, capable of controlling

up to 16 sets of units with maximum of 16 indoor units.

Through this smart centralized controller, it is available to view and control those running parameters

of the indoor unit, including on/off, running mode, fan speed etc, and also perform the single control and centralized

control, further, it also can set the weekly timer and long-distance shielding to realize convenient control to the

air conditioning system.

a. Single control: it is intended to control the running parameters of a designated indoor unit individually.

b. Centralized control: it is intended to control the running parameters of all indoor units at the same time.

c. Shielding under single or centralized control: it is intended to shield the running parameter of the indoor

unit.

d. Weekly timer under single or centralized control: it is intended to set when to start/stop the unit through

long-distance control.

e. Clock: it is intended to set and display the weekday, hour and minute.

After the debugging to the controller is finished, it can check the on-line indoor units and display the

parameter setting of the current running mode, set temperature, fan speed, weekly timer, shielding function etc.

When some error occurs, the error symbol and the error code will be displayed to warn a quick maintenance.

This smart centralized controller can be connected to the unit through the communication line without

the need of the communication module, which can extremely ease and simplify the installation.

Fig.1.1 Unit Connection Diagram

Table of Contents