Mode - Sinclair SCC-16 User's Installation And Operation Manual

5.3.2 Mode

Under the on state of the unit, whenever it is in single or centralized control, the running mode will
change circularly as the following sequence by pressing "Mode".
See Fig.5.5 for how to set the running mode:
If the New UNI DC Inverter indoor unit is under the "Auto" mode, and then it is available to view it through
the smart centralized controller.
5.3.3 ▲/ ▼
Apart from timing and time setting, under the on state of the unit, whenever it is in the single or
centralized control, it is enabled to:
Press "▲"to increase the set temperature.
Press "▼" to decrease the set temperature.
The temperature will increase or decrease 1
Temperature range under each mode: 16
See Fig.5.6 for how to adjust the temperature:
Cool Dry
AUTO
ROOM ROOM SET SET INNER UNIT
CH LD LOCK I COM
ERROR
SUNM ON TUEW ED THU FRI SAT
1 2 34 56 78
1 2
CENTER
24 68
0
9 10 11 12 13 14 15 16
Mod e Mod e Mon
Tue
Confirm/Cancel Confirm/Cancel
Fr iS at
Fa n Fa n
On/O ff On/O ff
Timer/ Time Centra l
Fig.5.5 Running Mode Setting
every 300 milliseconds by pressing "▲" or "▼".
℃
30 /61 ℉
℃～ ℃
AUTO
SET INNER UNIT
ROOM ROOM SET
CHLD LOCK I COM
ERROR
1 2 34 56 78 SUNM ON TUEW ED THUF RI SAT
1 2
CENTER
24 68
9 10 11 12 13 14 15 16 0
Mode Mode
Confirm/Cancel Confirm/Cancel
Fan Fan
On/Off On/Off
Fig.5.6 Temperature Adjustment
9
Fan Heat
Al l on /Al l off Al l on /Al l off
SUN
MON
TUE WED THU FRIS AT THU
ALL TEMP
SHIELD
MODE
ON/OFF
10 12 14 16 18 20 22 24
WedT hu
Su n
Shield
86 ℉
～
All on/All off All on/All off
SUN
MON
TUE WED THU FRI SAT THU
ALL TEMP
SHIELD MODE
ON/OFF
10 12 14 16 18 20 22 24