Page 1
WIRE CONTROLLER WIRE CONTROLLER INSTALAČNÍ A UŽIVATELSKÝ INSTALLATION AND USER INSTALAČNÍ A UŽIVATELSK INSTALAČNÍ A UŽIVATELSK MANUAL KJR- 90D AIR CONDITIONING...
Page 3
Thank you very much for purchasing our product. Before using your unit, please read this manual carefully and keep it for future reference. • This manual gives detailed description of the precautions that should be brought to your attention during operation. •...
Caution Means improper handling may lead to personal injury or property loss. • This manual uses the following icons: Prohibit Followtheguidelines • Please entrust the distributor or professionals to install the unit. • Before cleaning or maintenance please cut off the power. •...
Remote signal receiving function The wired remote controller can be a remote signal receiving device, you can use the wireless remote CAUTION The wired remote controller will not controller to control the air-conditioner receive the swing controlling instruction. For the indoor unit with swinging function, you can directly use the wireless remote controller to control swinging through the display...
Page 8
Under the timer on setting status, press The setting method of timer off is the same as the timer on. Under timer setting state, set the timer on and timer off to be 0.0 h can cancel timer on and timer off. CAUT ION If the wired remote controller has been set timer on/off, press the ON/OFF to...
The default setting value of the reminding function is 2500 hours and it can change to be 1250 hours, 5000 hours or 10000 hours. The setting methods please refer to the installation manual. If the indoor unit supports swing function, press the right button to adjust the air outlet direction of the indoor unit.
INSTALLATION WARNING • Please entrust the distributor or professionals to install the unit, do not install the unit by the user. 1 Safety precautions • Do not uninstall the unit randomly. • The wiring should adapt to the wire controller current. •...
Please filed install the following accessory. Number Name Remark Qty. Universal electric cabinet specification, Install box pre-embed it into wall. Pre-embed RVVP - 0,5mm Shielded 5-core cable Pre-embed into wall, the longest Wire configured tube (insulated sheath) length should not exceeding than 15 m. Philips screwdriver For unscrew the bottom cover of wire Slotted head screwdriver...
Page 12
out from standard electric cabinet to the wall. Confirm the two bolts fixing in the cabinet are in the same length and vertical to the wall surface. 7) Make the connecting wires of B part signal receiving panel to go through the hole of back cover and use.
4 WIRING DIAGRAMS WITH AIR CONDITIONING INDOOR UNITS Wiring diagram of the wire controller and the air conditioning indoor unit...
Page 14
SINCLAIR CORPORATION Ltd. 1-4 Argyll St. London W1F 7LD United Kingdom www.sinclair-world.com This product was manufactured in China (Made in China). REPRESENTATIVE SINCLAIR Global Group s.r.o. Purkynova 45 612 00 Brno Czech Republic TECHNICAL SUPPORT SINCLAIR Global Group s.r.o. Purkynova 45...