5. Viewing of the Running Status of the Indoor Unit and Control Mode
5.1 Viewing of the Running Status of the Indoor Unit
It can be seen generally on the LCD that the minimum code of the online indoor unit flashes, with its
running status, set temperature, and shield status etc. displayed. However, it can be replaced by other expected
indoor unit through pressing the corresponding indoor unit code button (If the expected indoor unit is offline,
then this operation is null and void with "no" displayed.).
See Fig.5.1 for how to view the running status of the indoor unit:
5.2 Control Mode
5.2.1 Single Control
Select the expected indoor unit through the indoor unit code button and then the code on the LCD will
flash.
Set the running status of the indoor unit and send out control commands, including On/Off, Mode, Fan,
▲ / ▼, and Shield etc. Without any change to the setting in 2.5 seconds, the control commands will be sent
out.
Fig.5.1 Viewing of the Running Status of the Indoor Unit
6