Time - Sinclair SCC-16 User's Installation And Operation Manual

Smart centralized controller

Hide thumbs Also See for SCC-16:

Table of Contents

(continued)

Fig.5.9 How to Cancel the Weekly Timer under the Single Control

5.3.5.3 How to Set the Weekly Timer under the Centralized Control

It is available to go to the weekly timing setting page by pressing "Timer/Time" under the single control

mode , with "*" flashing ("*" indicates MON, TUE, WED, THU, FRI, SAT, or SUN), and then press "Central"

with "CENTER" displayed on the LCD which indicates it is the right time to set the weekly timer under the

centralized control; after that, press the weekly day button to choose the expected day, press "Timer/Time" to

set the exact time and press "▲" or "▼" to adjust the time period, and finally press "Confirm/Cancel" to end

this setting (without this press, the setting will not be saved). This setting means this day is timed for all indoor

units. Besides, several time periods can be set on one day in the same day stated above.

After the setting, it can quit the timer setting status automatically 30 seconds later or by pressing "Timer/

Time".

See Fig. 5.10 for how to set the weekly timer under the centralized control:

Table of Contents