Sinclair SCC-16 User's Installation And Operation Manual page 29

Smart centralized controller

Hide thumbs Also See for SCC-16:

Table of Contents

(continued)

Quit this setting status automatically 30

seconds later or by pressing "Shield"

once.

5.3.7.8 "ALL" Shield under the Centralized Control

It is available to activate or deactivate the all shield for the centralized control: first press "Shield" with

"SHIELD" displayed on the LCD, next press it to switch to "ALL", then press "Central" with "CENTER"

displayed on the LCD and then press "Confirm/Cancel", after that, "ALL" will go on or go out and quit this

setting status at the same time.

See Fig.5.20 for "ALL" shield under the centralized control:

Under the single control status, press

"Shield " to switch to "AL L " .

All on/All off

All on/A l off

Fig.5.19 "ON/OFF" Shield under the Centralized Control

Press "Confirm/Cancel" to

activate / deactivate the shielding

function.

Press "Central" to go to the shielding

setting status under the centralized

control .

All on/ A l off

All on/ All off

Table of Contents