Removing The Feed Motor - Canon Inner Finisher-A1 Service Manual

4
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Feed Motor
11) Release the harness from the guide.
12) Remove one screw and then the harness guide.

Removing the Feed Motor

1) Disconnect one connector.
2) Remove two screws and then the feed motor.
x2
x1
4 Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Feed Motor
x1
F-4-58 F-4-58
13) Remove two screws, and then remove the shift motor.
x2
F-4-56 F-4-56
4-21
F-4-57 F-4-57
4-21