Connecting To Connected Equipment - Canon Inner Finisher-A1 Service Manual

Connecting to Connected Equipment

1) Set the guide wheels of the additional tray to the finisher rail and move the additional tray down with the same way as Step 3.
MEMO: Confirm that the tray does not incline. The difference of height between [B] and [B]' must be 2 mm or less.
([A] - [B]) - ([A]' - [B]') ≤ 2 mm
[A]
6
Installation(Addtional Tray-A1) > Installation Procedure > Connecting to Connected Equipment
[B]
6 Installation(Addtional Tray-A1) > Installation Procedure > Connecting to Connected Equipment
F-6-6 F-6-6
[A]'
[B]'
F-6-7 F-6-7
6-6
6-6