5
Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
12) Release the fitting to remove the switch cover from the right front cover.
14) Remove 1 cap and 1 screw to detach the inner cover (small) of the host machine.
The inner cover (small) is no longer reused.
x1
5
Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
13) Fit the switch cover removed at Step 12 to the Right front cover.
F-5-16
F-5-16
15) Remove the sensor flag of the 1st delivery tray. The sensor flag is no longer reused.
MEMO: Bend the sensor flag shaft a little to remove it.
F-5-18
F-5-18
F-5-17
F-5-17
2
3
1
F-5-19
F-5-19
5-8
5-8