Canon Inner Finisher-A1 Service Manual page 78

2) Remove the 3 screws to detach the inner front cover.
x3
4) Fix the supplied 3 harness guides.
x3
6
Installation(Addtional Tray-A1) > Installation Procedure > Connecting to Connected Equipment
F-6-10 F-6-10
6 Installation(Addtional Tray-A1) > Installation Procedure > Connecting to Connected Equipment
3) Fix the additional tray driver PCB with the supplied screw.
x1
F-6-8 F-6-8
5) Put the additional tray harness in the slit of the harness guide.
6-7
F-6-9 F-6-9
F-6-11 F-6-11
6-7