Canon Inner Finisher-A1 Service Manual page 68

5
Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
20) Slide the tray lower cover to rear side until it stops while pressing it down and fix it by 1
screw (binding screw, M3x6) using a stubby screwdriver.
x1
22) Fix the supplied wire saddle to the upper side of the fan.
5 Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
21) Fix the supplied harness cover and finisher guide with 1 screw (binding screw, M3x12)
using a stubby screwdriver.
x1
F-5-24 F-5-24
F-5-26 F-5-26
5-10
F-5-25 F-5-25
5-10