Canon Inner Finisher-A1 Service Manual page 44

4
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the STP Move Motor/Gripper Unit Move Motor
12) Remove three screws and then the processing tray.
x3
14) Remove two screws and then the STP move motor/gripper unit move motor unit.
x2
4 Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the STP Move Motor/Gripper Unit Move Motor
13) Disconnect two connectors and the spring.
x2
F-4-67 F-4-67
F-4-69 F-4-69
4-24
F-4-68 F-4-68
4-24