Canon Inner Finisher-A1 Service Manual page 52

4
Parts Replacement and Cleaning Procedure > Removing the Switches > Removing the Staple Safety Switch
3) Remove the additional tray PCB along with the mount (only when the additional tray is
installed).
x1
4 Parts Replacement and Cleaning Procedure > Removing the Switches > Removing the Staple Safety Switch
4) Disconnect the relay connector of the staple safety switch, and then remove harness from the wire
saddle and harness guide.
x1
F-4-93 F-4-93
x4
F-4-95 F-4-95
4-32
F-4-94 F-4-94
4-32