Canon Inner Finisher-A1 Service Manual page 63

5
Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
Installation Procedure
Installation Procedure
1) Hold the positions shown in the figure and take out the finisher from
the carton. (Hold the positions specified by the instruction labels.)
3) Remove the stopper and take out the 2nd delivery tray. (This step is applicable only when the 2nd delivery tray is installed in the host machine.)
The 2nd delivery tray is no longer reused.
5 Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
2) Remove the adhesive tapes and cushions and
x3
F-5-4 F-5-4
remove 3 screws to detach the 2 fixtures.
F-5-6 F-5-6
5-5
F-5-5 F-5-5
5-5