Canon Inner Finisher-A1 Service Manual page 71

5
Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
30) Fix the combined right front cover and inner cover contained in the finisher
carton box with 2 screws (RS-tight screw, M3x6).
x2
32) Close all the external covers.
Stick the supplied main power label on the upper part of the
main power switch.
5 Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
31) Set the supplied staple cartridge into the stapler.
F-5-34 F-5-34
33) The following parts remain after installing the finisher. Make sure not to leave the remained parts at the site.
F-5-36 F-5-36
F-5-35 F-5-35
Delivery tray
2nd delivery tray
Stopper
Reversal guide
Right front cover
Inner cover (small)
Control panel lower cover
Sensor flag
Cap
Protection cover
*1 only when the 2nd delivery tray is installed in the host machine
*2 2 pcs. only when the 2nd delivery tray is installed in the host machine
F-5-37 F-5-37
5-13
1 pc.
1 pc.(*1)
1 pc.(*1)
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.(*2)
2 pcs.
1 pc.
5-13