Canon Inner Finisher-A1 Service Manual page 34

4
Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Paper Lever Drive Solenoid
9) Remove three screws and then the grate-shaped guide (lower).
x3
12) Remove three screws and then the processing tray.
x3
4 Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Paper Lever Drive Solenoid
10) Remove two wire saddles.
11) Disconnect the relay connector and one screw.
x2
F-4-32 F-4-32
13) Remove the harness from the harness guide.
14) Remove one screw and then the paper lever unit.
15) Remove two screws and then the paper lever drive solenoid.
x2
F-4-34 F-4-34
x1
x1
4-14
F-4-33 F-4-33
x1 x1
F-4-35 F-4-35
4-14