Removing The Staple Solenoid - Canon Inner Finisher-A1 Service Manual

4
Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Staple Solenoid

Removing the Staple Solenoid

1) Remove the upper unit.
"Removing the Upper Unit"(page 4-4).
2) Move the stapler rearward.
6) Remove the additional tray harness (only when the additional tray is installed).
7) Remove the tray.
4 Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Staple Solenoid
3) Remove the reuse band of the additional tray harness (only when the additional tray is
installed).
4) Remove the reuse and of the tray harness.
5) Remove one screw.
F-4-36 F-4-36
8) Move the gripper unit in the direction of the arrow.
F-4-38 F-4-38
x2 x1
4-15
F-4-37 F-4-37
F-4-39 F-4-39
4-15