Engineering Communication - YASKAWA MP2000 Series User Manual

2.1 Features

2.1.3 Engineering Communication

2.1.3 Engineering Communication

By connecting the 263IF-01 Module to the Programming Device MPE720, ladder programming and monitoring are
possible through engineering communication.
The self configuration function of the MP2000-series Machine Controller enables an Ethernet connection between the
personal computer where MPE720 is installed and the 263IF-01 Module, without requiring settings for connections at
the 263IF-01 Module.
 The Communication Manager setting on the personal computer and connection setting on the MPE720 are neces-
sary. For details, refer to 3.3.2 Setting the Communication Manager on page 3-10, 3.5.1 Starting MPE720 Ver. 6 and
Setting Communication Parameters on page 3-15 and 3.5.2 Starting MPE720 Ver. 5.xx and Setting Network Param-
eters on page 3-16.
The following figure illustrates a layout for connection with the MPE720.
2-4
MP2000-series Machine Controller
MP2200
CPU-02 SVB-01 263IF-01 262IF-01 LIO-04 LIO-04 LIO-04 LIO-01 LIO-01
Personal computer
MPE720
Command
Response