YASKAWA MP2000 Series User Manual page 91

A.2 Extended Status Code Table
Extended
Status Code
(Hex)
ROUTER_EXT_ERR_DUPLICATE_FWD_
0100
OPEN
ROUTER_EXT_ERR_CLASS_TRIGGER_
0103
INVALID
ROUTER_EXT_ERR_OWNERSHIP_
0106
CONFLICT
ROUTER_EXT_ERR_CONNECTION_NOT_
0107
FOUND
ROUTER_EXT_ERR_INVALID_CONN_
0108
TYPE
ROUTER_EXT_ERR_INVALID_CONN_SIZE
0109
ROUTER_EXT_ERR_DEVICE_NOT_
0110
CONFIGURED
ROUTER_EXT_ERR_RPI_NOT_
0111
SUPPORTED
ROUTER_EXT_ERR_CONNECTION_LIMI_
0113
REACHED
ROUTER_EXT_ERR_VENDOR_PRODUCT_
0114
CODE_MISMATCH
ROUTER_EXT_ERR_PRODUCT_TYPE_
0115
MISMATCH
ROUTER_EXT_ERR_REVISION_
0116
MISMATCH
ROUTER_EXT_ERR_INVALID_CONN_
0117
POINT
ROUTER_EXT_ERR_INVALID_CONFIG_
0118
FORMAT
ROUTER_EXT_ERR_NO_CONTROLLING_
0119
CONNECTION
ROUTER_EXT_ERR_TARGET_CONN_
011A
LIMIT_REACHED
ROUTER_EXT_ERR_RPI_SMALLER_THA_
011B
INHIBIT
ROUTER_EXT_ERR_CONNECTION_
0203
TIMED_OUT
ROUTER_EXT_ERR_UNCONNECTED_
0204
SEND_TIMED_OUT
ROUTER_EXT_ERR_PARAMETER_ERROR Parameter error in the Unconnected_Send service
0205
ROUTER_EXT_ERR_MESSAGE_TOO_
0206
LARGE
ROUTER_EXT_ERR_UNCONN_ACK_
0207
WITHOUT_REPLY
ROUTER_EXT_ERR_NO_BUFFER_
0301
MEMORY_AVAILABLE
ROUTER_EXT_ERR_BANDWIDTH_NOT_
0302
AVAILABLE
ROUTER_EXT_ERR_TAG_FILTERS_NOT_
0303
AVAILABLE
ROUTER_EXT_ERR_REAL_TIME_DATA_
0304
NOT_CONFIG
ROUTER_EXT_ERR_PORT_NOT_
0311
AVAILABLE
Text
The connection is currently being used, or Forward_Open is
duplicated.
The combination of the specified transport class and trigger is
not supported.
Conflict in ownership
The connection is not found in the target application.
The connection type is invalid. The connection type or connec-
tion priority is incorrect.
The connection size is invalid.
The device is not set.
RPI is not supported.
The connection timeout multiplier or production inhibit time
value may also be incorrect.
The Connection Manager cannot support any further connec-
tions.
The vendor ID or product code in the key segment does not
agree with the device.
The product type in the key segment does not agree with the
device.
The major or minor revision information in the key segment
does not agree with the device.
The connection point is invalid.
The configured format is invalid.
The connection request failed because no control connection is
currently open.
The target application cannot support any further connections.
The RPI value is smaller than the production inhibit time value.
The connection cannot be terminated due to timeout.
Timeout of the Unconnected_Send service was detected while
waiting for the response.
The message for the unconnected message service is too large.
Unconnected type ACK for which a response is not given
No available buffer memory.
No available network bandwidth for data transmission.
No usable tag filter is available.
The system is not configured to send data in real time.
The port specified in the port segment is not available.
Appendix A Details of Status Codes
A.2 Extended Status Code Table
Details
App
A-3