YASKAWA MP2000 Series User Manual page 3

Using this Manual
This manual describes EtherNet/IP Communication Module 263IF-01 for the MP2000-series Machine Controller.
Read this manual thoroughly before using the 263IF-01. Keep this manual in a safe place for future reference.

Basic Terms
Unless otherwise specified, the following definitions are used:
• MP2000-series Machine Controllers: MP2100M, MP2200, MP2300, MP2310, and MP2300S Machine Controllers
• PLC: Programmable Logic Controller
• MPE720: The Programming Device Software or a personal computer running the Programming Device Software

Manual Configuration
This manual consists of the chapters listed in the following table. Read the chapters of this manual as required by the
purpose.
Purpose
Chapter
Chapter 1 EtherNet/IP
Communication
Chapter 2 263IF-01 Module
Chapter 3 Mounting and Starting
the Module
Chapter 4 EtherNet/IP
Transmission
Definition
Chapter 5 Explicit Message and
Explicit Message
Send Function
Chapter 6 Troubleshooting

Graphic Symbols Used in this Manual
The graphic symbols used in this manual indicate the following type of information.
 This symbol is used to indicate important information that should be memorized or minor precautions,
such as precautions that will result in alarms if not heeded.

Indication of Reverse Signals
In this manual, the names of reverse signals (ones that are valid when low) are written with a forward slash (/) before
the signal name, as shown in the following example:
<Notation Examples>
Selecting
Studying
Models and
Specifications
Peripheral
and Ratings
Devices

 



S-ON = /S-ON
P-CON = /P-CON
Designing Panel
Trial
the Installation
Operation
System and Wiring

 
 


 
Maintenance
and
Inspection
 
 
 

 
iii