Remote Transceiver Command Reference; Command Description - Microwave Data Systems MDS entraNET 900 System Manual

MDS 05-4055A01, Rev. A
6.1 REMOTE TRANSCEIVER
COMMAND REFERENCE

6.1.1 Command Description

The following commands are used to set the configuration and operating
parameters for the MDS entraNET radio...They can be issued from a
console terminal connected as shown in Section...
HELP
Lists the commands available through the console interface.
HELP DUMP
LOGIN AUTH
COM1 CONSOLE
REG POWER
ENCRYPT REPROG
DEVICE CONFIG
DUMP
Lists the current value of all variables.
TOR
Syntax: TOR [optional arguments as follows]...
<COMMAND>
PASS=<choices>
0 ;COM2 passthrough to/from TOR LCP data port DISABLED
1 ;COM1 passthrough to/from TOR diagnostic port
2 ;COM2 passthrough to/from TOR LCP data port
REPROG=<choices>
0 ;reprogram tor with image for currently executing OIB image.
MDS entraNET 900 System Guide (Preliminary)
TOR RADIO
BOOT
PAYLOAD
WAKE
H2H
CONFIGTAB
command string to send to TOR
DATE
OEM
TREND
VER
IMAGE
115