Cleaning And Changing The Filter - Silvercrest SLE 280 A2 Operating Instructions Manual

Hide thumbs

Advertisement

Table of Contents
Cleaning and changing the filter
The performance of the appliance also depends upon how clean the filter is.
The plastic filter
The carbon filter
months.
NOTE
You can purchase new carbon filters in almost all shops selling household
goods. The carbon filter mats just need to be cut to size.
Switch the appliance off and remove the mains plug.
Remove the water tank
To remove the air inlet grille
air inlet grille
Remove the air inlet grille
To remove the plastic filter
plastic filter
Now, remove the plastic filter
ance by pulling it downwards.
The carbon filter
Start by removing the plastic filter
fully out from under the retaining tabs in the plastic frame.
Now remove the carbon filter
Wash down both filters with lukewarm water.
Allow both filters to dry completely before re-inserting the filter in the
appliance.
To insert, follow the reverse sequence.
SLE 280 A2
9
should be washed every 2 weeks.
should be cleaned every 2 weeks and changed every 6
10
from the appliance.
5
8
, three plastic lugs located at the base of the
8
must be pressed upwards slightly to allow release.
8
in a downwards motion.
, two plastic lugs located at the base of the
9
must be pressed downwards slightly to allow release.
9
9
including the plastic frames from the appli-
is also located behind the plastic filter
10
.
10
from the plastic frame by lifting it care-
9
9
8
GB │ MT
9
.
10
 45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents