Rack-Mounting The Switch - HP A5500 HI Series Installation Manual

Figure 8 Identifying the front mounting position
Figure 9 Identifying the rear mounting position

Rack-mounting the switch

This task requires two people. To mount the switch in the rack:
Wear an ESD-preventive wrist strap and make sure it makes good skin contact and is well
1.
grounded.
Check that the mounting brackets have been securely attached to the switch chassis.
2.
Install cage nuts (user-supplied) in the mounting holes in the rack posts.
3.
One person holds the switch chassis and aligns the mounting brackets with the mounting holes in
4.
the rack posts, and the other person attaches the mounting brackets with screws (user-supplied) to
the rack.
Check that the switch chassis is horizontal and tighten the screws.
5.
9