Rack-Mounting An A5800Af-48G/A5820Af-24Xg Switch - HP A5820X Series Installation Manual

Figure 13 1U bracket rear mounting position
Figure 14 2U bracket front mounting position
NOTE:

Installing the 2U mounting brackets in the rear mounting position is similar to installing the brackets in the front
mounting position.

To install the 2U mounting brackets in the mid-mounting position of a 2U switch chassis, first use a screwdriver to
loosen the three captive screws and separate the mounting brackets from the cable management brackets (see
Figure 15).
Figure 15 Separating a cable management bracket from a mounting bracket
(1) Captive screws

Rack-mounting an A5800AF-48G/A5820AF-24XG switch

Attaching the slide rails to the rack
You must install slide rails for rack-mounting an A5800AF-48G or A5820AF-24XG switch.
(2) Cable management bracket
13
(3) Mounting bracket