Download  Print this page

Mounting The Switch On A Workbench - HP A5500 HI Series Installation Manual

Hide thumbs

Advertisement

Figure 10 Mounting the switch in the rack

Mounting the switch on a workbench

IMPORTANT:
Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.
Avoid placing heavy objects on the switch.
To mount the switch on a workbench:
Check that the workbench is sturdy and well grounded.
1.
Place the switch with bottom up, and clean the round holes in the chassis bottom with dry cloth.
2.
Attach the rubber feet to the four round holes in the chassis bottom.
3.
Place the switch with upside up on the workbench.
4.
10

Advertisement

loading

This manual is also suitable for:

A5500-48g-4sfp hiA5500-24g-4sfp hi