HP A5500 HI Series Installation Manual page 34

0. Reboot
Enter your choice(0-9):
Enter 0 at the prompt. The system reboots in normal (full) startup mode and displays the following
information:
Starting......
********************************************************************************
*
* HP A5500-48G-4SFP HI Switch with 2 interface Slots BOOTROM, Version 112
*
********************************************************************************
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
Creation Date : Jun 17 2011,17:17:50
CPU Clock Speed : 750MHz
Memory Size : 1024MB
Flash Size : 512MB
CPLD Version : 002
PCB Version : Ver.B
Mac Address : 00E058778800
Press Ctrl-B to enter Extended Boot menu...5
In normal (full) startup mode, you must press Ctrl + B within five seconds to enter the Boot menu. If you
perform no operation or press a key other than Ctrl + B within five seconds, the system automatically
starts up and displays the following information:
Starting to get the main application file--flash:/A5500HI_release.bin!......
...............................................................................
.............................................
The main application file is self-decompressing................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
.................Done!
System is starting...
Board checking.......................LSP5LTSUB
Switch chip selftest.......................OK!
SDRAM fast selftest........................OK!
Flash fast selftest........................OK!
PHY selftest...............................OK!
CPLD selftest..............................OK!
Please check leds....................FINISHED!
User interface aux0 is available.
29
*
*
*