Selecting An Output Type; Changing The Upper Output Span - GE Moisture Target Series 6 User Manual

3.3.3 Selecting an Output Type

Before changing the output type, refer to Section 2.2 Selecting the
Note:
Recorder Output on page 4 to make sure that Switch S1 is at the
correct setting (V for voltage or I for current).

3.3.4 Changing the Upper Output Span

Moisture Target Series 6 Hygrometer User's Manual
Chapter 3. Operation and Programming
To change the output type, from the Output
Menu select Type and press Enter
screen similar to the following appears:
Use the arrow keys to select a new output
type. Press Enter
to keep the previous value), and return to the
Output Menu.
To adjust the upper output span, from the
Output Menu select Upper and press
Enter
. A screen similar to the following
appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press Enter
to keep the previous value), and return to
Output Menu.
to save (or Cancel
to save (or Cancel
. A
39