Setting The Volume Mixing Ratio - GE Moisture Target Series 6 User Manual

Chapter 3. Operation and Programming

3.6.8 Setting the Volume Mixing Ratio

Setting the Volume Mixing Ratio is an optional feature, available
Note:
only if the ppmv software version was purchased.
3.6.8a Setting the Pressure Units
68
To set the volume mixing ratio, from
Note:
the Settings Menu select V/V Ratio and press
Enter
. The following screen appears.
To access the Cal Data menu, the User
Note:
Passcode is required (see section 3.6.1 on
page 56).
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Once the passcode has been entered,
press Enter
appears.
To set the pressure units, select Press. Units
and press Enter
appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press Enter
to keep the previous value), and return to the
previous menu.
Moisture Target Series 6 Hygrometer User's Manual
and the following screen
. The following screen
to save (or Cancel