Appendix C. Reading The Microsd Card; Removing The Card - GE Moisture Target Series 6 User Manual

Appendix C. Reading the MicroSD Card

C.1 Removing the Card
IMPORTANT: Before removing the MicroSD Card, refer to section 3.5.4 Ejecting
the SD Card on page 55, to first stop the data log.
Locate the memory card in the lower center of the rear panel and pull
1.
the flexible cover from the left. The cover hangs from the right side (see
Figure 51 and Figure 52).
Moisture Target Series 6 Hygrometer User's Manual
Figure 51: Pulling the Flexible Cover
Figure 52: The Opened Memory Card Holder
Appendix C. Reading the MicroSD Card
97