Chapter 2. Installation
2.1 Introduction
Installing the MTS6 includes the following steps:
•
selecting the recorder output
•
mounting the electronics unit
•
mounting the sample system
•
installing the probe into the sample system
•
wiring the input power
•
wiring the probe and alarm connections
To ensure safe operation, the MTS6 must be panel
WARNING!
mounted and operated as described in this manual. Also,
be sure to follow all applicable local safety codes and
regulations for installing electrical equipment.
For the non-enclosure MTS6 package, please refer to Appendix D for
Note:
mounting and installation.
Moisture Target Series 6 Hygrometer User's Manual
Chapter 2. Installation
3