Selecting A Fi Le For Logging - GE AutoSigma 3000 DL Technical Reference, Operating Manual

Operation
Logging can then be repeated until fi le 1 is full. When
this occurs the display will respond with:
When this occurs another fi le must be selected for
logging to continue. If during logging a fi le location is
selected that already contains a stored value then the
display will indicate this as follows:
5 - 12
When this occurs another fi le or fi le location must be
selected for logging to continue, or the fi le location
cleared. Press MEM to display the contents then a
long press on C to clear the fi le.
Selecting a fi le for logging
With the instrument in the Measurement mode:
Step
1 Open the fi le menu.
2 Select the next fi le re-
quired (e.g. 2).
3 Return to Measurement
mode.
With the instrument returned to the Measurement
mode further logging or measuring can take place.
Further logged readings will automatically be placed in
the next available empty fi le location.
Issue 04, 06/2007
Data logging (internal)
Key Display
AutoSigma 3000