GE Moisture Target Series 6 User Manual page 96

Chapter 5. Specifications
5.1 Electronics (cont.)
Alarm Setpoint Repeatability:
±0.1°C dew point
MicroSD:
Supports MicroSD and MicroSDHC (high capacity) cards up to 32 GB,
with individual logs up to 4 GB in size. The factory-supplied card has a
capacity of 4 GB, or over 90 million average log records.
The MTS6 unit has been fully tested with SanDisk MicroSD/SDHC
Note:
and Kingston MicroSD cards. It is therefore recommended that the
customer use SanDisk or Kingston brand cards.
Configurations:
panel-mount, PC board
Display:
128 x 64 matrix LCD display with LED backlight
Front Panel:
weatherproof membrane front panel display/keypad meets NEMA 4 and
IP66 requirements (panel-mount version only)
Display Functions:
dew point temperature °C or °F, or sensor signal MH or FH
Input Power:
option 1, AC: universal power 100-240 VAC @ 50-60 Hz
option 2, DC: 24 VDC nominal ±10%
Power Dissipation:
AC units: 5 W maximum
DC units: 5 W maximum
86 Moisture Target Series 6 User's Manual