GE Moisture Target Series 6 User Manual page 59

3.5.2a Setting Log Units (cont.)
If the ppmv software version was purchased, PPMv, mg/m
Note:
and kg/m
To remove a unit, from the Units to Log menu, select Remove and press
Enter . Select the unit to be removed, press Enter
deleted. Press Cancel
3.5.2b Setting the Log Interval
Moisture Target Series 6 Hygrometer User's Manual
Use the arrow keys to select the unit to be
represented by #1 and press Enter
screen returns to the Units to Log menu.
Note:
replaces MH.
3
will be available.
to return to the Set Log Params menu.
To set the log interval, from the Set Log
Params menu, select Interval and press
Enter
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press Enter
to keep the previous value), and return to the
Set Log Params menu.
Chapter 3. Operation and Programming
If the VeriDri probe is being used, FH
. The following screen appears.
. The
3
, g/m
, and the unit is
to save (or Cancel
3
,
49