Mounting The Electronics Unit; Basic Mounting - GE Moisture Target Series 6 User Manual

Chapter 2. Installation

2.3 Mounting the Electronics Unit

The MTS6 unit can be installed in a panel up to 0.25 in. (6 mm) thick. See
Appendix A, Outline and Installation Drawings, for the required panel
cutout dimensions.
For
IMPORTANT:
in a rigid, flat panel using the panel gasket and both mounting
brackets provided.

2.3.1 Basic Mounting

To mount the MTS6 in a panel with a basic 94 mm (3.69") x 46 mm (1.81")
opening, refer to the following figures and complete the following steps:
Remove the side panel mount label prior to installation.
1.
Figure 9: Removing Side Panel Mount Label
8
and
NEMA 4 IP66
Moisture Target Series 6 Hygrometer User's Manual
installation, the MTS6 must be mounted