Setting Up Alarms; Selecting An Alarm Output; Selecting Alarm Status - GE Moisture Target Series 6 User Manual

3.4 Setting Up Alarms

The MTS6 is equipped with two programmable high/low alarm relays
Note:
and one fault alarm.

3.4.1 Selecting an Alarm Output

3.4.2 Selecting Alarm Status

Moisture Target Series 6 Hygrometer User's Manual
Chapter 3. Operation and Programming
To set up alarm outputs, on the Main Menu
choose Alarm and press Enter
Alarm Menu choose Select and press
Enter
. A screen similar to the following
appears.
Use the arrow keys to select the output
(A or B) to be set up and press Enter
The display returns to the Alarm Menu.
To select the alarm status, from the Alarm
Menu select Status and press Enter
following screen appears:
Use the arrow keys to select OFF or ON and
press Enter
. The display returns to the
Alarm Menu.
. From the
.
. The
43