2.
Select the camera to configure the video loss alarm.
3.
Check Enable Video Loss Detection.
4.
Set the arming schedule for video loss detection. Please refer to Step 6 in Chapter 7.1.1 Configuring Motion
Detection.
5.
Set the actions taken for video loss detection. Please refer to Step 7 in Chapter 7.1.1 Configuring Motion
Detection.
6.
Click Save to save the settings.
7.1.5 Configuring Video Tempering Alarm
Purpose:
If you enable this function, an alarm will be triggered when the image of camera is tampered with.
Steps:
1.
Go to Configuration> Event > Basic Event > Video Tempering.
2.
Select the camera to configure the video tampering detection alarm.
DS-6700HUHI-K Series Encoder User Manual
Figure 7. 10 Video Loss Alarm Settings
56