Checking S.m.a.r.t. Information - HIKVISION DS-6700HUHI-K Series User Manual


Up to 8 NAS disks and 1 IP SAN disk can be connected.

9.3 Checking S.M.A.R.T. Information

Purpose:
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to detect
and report on various indicators of reliability in the hopes of anticipating failures.
Steps:
1. Go to Configuration > Storage > Storage Management > HDD Detection.
2. Click the S.M.A.R.T. Settings tab to enter the page.
3. Select the HDD to view its S.M.A.R.T. information list, as shown below.
If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the checkbox before the
Continue to use this disk when self-evaluation is failed item.
DS-6700HUHI-K Series Encoder User Manual
Figure 9. 8 S.M.A.R.T. Information
72